FREE Shipping on all orders over £50

  01324 489 136

  Home

Trade Magazine

Product filters Product filters

Price

£  –  £

  • £3.21
  • £372.03
Brands

Sub Categories Sub Categories

Router Bits & Accessories

Sort by Price: High to Low
64 Per Page
Trend - Kitchen Worktop Cutter Display of 10
£372.03 (£446.44 inc VAT)
Trend, 5027654550540, DEAL/TB/KIT/10
Professional TC Worktop Cutter Two flute cutter with a 12.7 mm (1/2in) diameter. TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods...
In stock
+ −
Save 13%
Trend - 2 Part Hinge Jig H/JIG/A
£267.20 £231.74 (£278.09 inc VAT)
Trend, 5027654536339, H/JIG/A
A 2-part hinge jig, portable template set designed for recessing hinges in wooden doors and frames. It is easy-to-use with minimal setting-up time,...
In stock
+ −
Save 13%
Trend - HJIGC 2 Part Skeleton Hinge Jig
£267.20 £231.74 (£278.09 inc VAT)
Trend, 5027654559734, H/JIG/C
The Trend Skeleton Hinge Jig is a 2-part, adjustable portable template set designed for recessing hinges in wooden doors and frames with a router. It is...
In stock
+ −
Save 9%
Trend - Mortice & Tenon Jig MT/JIG
£236.85 £215.97 (£259.16 inc VAT)
Trend, 5027654523889, MT/JIG
The Trend Mortice & Tenon Jig MT/JIG enables mortice, tenons and dowel joints to be cut with a router. Ideal for cabinets, chairs and table joints....
In stock
+ −
Trend - Ellipse & Circle Cutting Jig Ellipse J/A
£197.14 (£236.57 inc VAT)
Trend, 5027654502693, ELLIPSEJ/A
Designed to enable virtually any router to cut ellipses and circles. Used for corner tables, arches, desks and mirrors. Setting-up and operating is simple...
In stock
+ −
Save 5%
Trend - STAIR/A Staircase Jig
£195.49 £185.40 (£222.48 inc VAT)
Trend, 5027654504628, STAIR/A
Closed Riser Staircase Jig A is constructed from hard wearing solid laminate and includes a reversible fence for exact matching of stairs, Kit includes:- 1...
In stock
+ −
Trend - Craft Dovetail Jig 300mm
£171.48 (£205.78 inc VAT)
Trend, 5027654525951, CDJ300
The Trend CDJ300 Craft Dovetail Jig is accurate and easy-to-use for a variety of elegant dovetail joints. It cuts 12.7mm (1/2in) wide half blind dovetails...
In stock
+ −
Save 17%
Trend - KWJ900 Kitchen Worktop Jig 900mm
£178.14 £148.31 (£177.97 inc VAT)
Trend, 5027654536360, KWJ900
Tradesman ALL IN ONE work top jig for up to 900 mm worktops. Hard wearing solid laminate 12 mm thick jig that cuts both parts of the joint in 15-minutes...
In stock
+ −
Trend - Pro Multi-Material Worktop Jig 150-750mm
£139.04 (£166.85 inc VAT)
Trend, 5027654071076, KWJ750P
The Trend Pro Multi-Material Jig cuts a full male and female joint in 15 minutes, including setting up. All settings are done from the front edge,...
In stock
+ −
Save 4%
Trend - Draining Groove Jig DG/JIG
£134.97 £129.78 (£155.74 inc VAT)
Trend, 5027654542392, DG/JIG
The Trend Draining Groove Jig is perfect for routing draining grooves in solid timber for Belfast type sinks. Made from 12mm hardwearing CNC machined...
In stock
+ −
Trend - 1/4in TCT Router Bit Starter Set, 50 Piece
£129.95 £129.60 (£155.52 inc VAT)
Trend, 5027654061794, SET/SS50X1/4TC
The Trend 50 Piece Router Bit Starter Set contains a range of popular 1/4in tungsten carbide tipped cutters for a variety of applications. Suitable for...
In stock
+ −
Trend - KWJ700 Kitchen Worktop Jig 700mm
£111.23 (£133.48 inc VAT)
Trend, 5027654559710, KWJ700
The KWJ700 has fixed lengths for 250mm, 300mm, 400mm, 500mm, 550mm, 600mm, 616mm, 650mm and 700mm worktops. Length: 985mm. Width: 390mm. Thickness: 12...
In stock
+ −
Trend - PH/JIG Pocket Hole Jig
£110.75 (£132.90 inc VAT)
Trend, 5027654523841, PH/JIG
The Trend PH/JIG Pocket Hole Jig is supplied with: 100 x Dome Head Screws, 1 x Face Clamp, 1 x HSS Drill Bit With Collar, 1 x 75mm Square Drive Bit, 1 x...
In stock
+ −
Save 2%
Trend - 334 x 1/2 TCT Aquamac Recessor
£111.98 £109.38 (£131.26 inc VAT)
Trend, 5027654005842, 334X1/2TC
Ref 334 recessing cutter will accomodate the Schlegal Aquamac 21 seal. This cutter is designed for use with the Aquamac seal in a wiping mode and comes...
In stock
+ −
Trend - 46/390 x 1/2 TCT Bearing Guided Rebater 22.5mm x 50.8mm
£102.82 (£123.38 inc VAT)
Trend, 5027654027745, 46/390X1/2TC
Bearing guided rebate set for straight of curved work, this set is ideal for either stationary or portable routers. The standard rebate depth is 19.1 mm...
In stock
+ −
Trend - Vari Jig Angle Guide VJSAG36
£98.90 (£118.68 inc VAT)
Trend, 5027654549797, VJS/AG/36
The Trend VJSAG36 is an adjustable angle guide to allow grooving with the router, or crosscutting with a circular saw. It has an adjustable angle range from...
In stock
+ −
Trend - 337 x 1/2 TCT Tongue & Groove Set 6.35mm x 10.0mm
£97.24 (£116.69 inc VAT)
Trend, 5027654005859, 337X1/2TC
A one-piece tongue and groove set. The parts are inter-changed on the arbor to alter the set up. Maximum timber thickness 22 mm. Minimum timber...
In stock
+ −
Trend - 348 x 1/2in TCT Intumescent Cutter Set 15mm
£97.23 (£116.68 inc VAT)
Trend, 5027654030295, 348X1/2TC
Cutter Set Ref. 348 is used for the grooving of door edges to receive 10mm intumescent strip. The arbor can be lowered or raised to give a wider groove for...
In stock
+ −
Trend - RB/A Replacement Blades (Pack 10)
£95.20 (£114.24 inc VAT)
Trend, 5027654027042, RB/A/10
Spare Rota-Tip Blades to suit Rota Tip Cutters. Length 29.5 mm Width 9.0 mm Thickness 1.5 mm Pack of 10
In stock
+ −
Trend - 46/38 x 1/2 TCT Bearing Guided Chamfer 45° 50 x 19mm
£94.03 (£112.84 inc VAT)
Trend, 5027654008713, 46/38X1/2TC
T.C.T. 1/2in Shank. A = 45° C1 = 19 mm C2 = 26 mm D = 51.5 mm B = 12.7 mm
In stock
+ −
Save 18%
Trend - Lock Jig for Router
£112.47 £92.69 (£111.23 inc VAT)
Trend, 5027654521731, LOCK/JIG
The jig requires a router fitted with a 30mm guide bush and 12mm diameter long reach cutter. For most common sash mortice and dead locks with up to 3in...
In stock
+ −
Trend - 9/73 x 1/2 TCT Bearing Guided Corner Bead Cutter 7.0 Radius
£90.09 (£108.11 inc VAT)
Trend, 5027654013946, 9/73X1/2TC
Tooling T.C.T. 1/2in Shank. R = 7 mm D = 31.9 mm d = 28.6 mm B = 16 mm
In stock
+ −
Trend - 46/22 x 1/2 TCT 90° Template Profiler 18.2 x 50mm
£89.17 (£107.00 inc VAT)
Trend, 5027654008393, 46/22X1/2TC
Angle A = 90° D = 18.2 mm C = 50 mm
In stock
+ −
Trend - 46/23 x 1/2 TCT 90° Template Profiler 12.7 x 50mm
£89.17 (£107.00 inc VAT)
Trend, 5027654026229, 46/23X1/2TC
Angle A = 90° D = 12.7 mm C = 50 mm
In stock
+ −
Trend - 46/39 x 1/2 TCT Bearing Guided Rebate Set 35 x 12.7mm
£88.41 (£106.09 inc VAT)
Trend, 5027654008720, 46/39X1/2TC
1/2in Shank. By changing the bearing the size of the rebate can be altered. Supplied with 4 bearings. Use of : 19 mm Bearing gives rebate of 7.9 mm. 16 mm...
In stock
+ −
Trend - 46/160 x 1/2 TCT Bearing Guided Ovolo & Round Over 16mm Radius
£86.90 (£104.28 inc VAT)
Trend, 5027654008300, 46/160X1/2TC
Tooling : T.C.T. 1/2in Shank. R = 16 mm D = 44.5 mm C = 22 mm Bearings = 9.5 and 12.7 mm
In stock
+ −
Trend - 46/17 x 1/2 TCT Bearing Guided Ovolo & Round Over 19.1mm Radius
£86.90 (£104.28 inc VAT)
Trend, 5027654008317, 46/17X1/2TC
Tooling : T.C.T. 1/2in Shank. R = 19 mm D = 51 mm C = 25 mm Bearings = 9.5 and 12.7 mm
In stock
+ −
Trend - 46/360 x 1/2 TCT Bearing Guided Chamfer 45° 35.1 x 12mm
£86.90 (£104.28 inc VAT)
Trend, 5027654026304, 46/360X1/2TC
T.C.T. 1/2in Shank. A = 45° C1 = 12 mm C2 = 16 mm D = 35.1mm B = 12.7 mm
In stock
+ −
Save 7%
Faithfull - 1/2in TCT Router Bit Set, 35 Piece
£89.59 £83.13 (£99.76 inc VAT)
Faithfull, 5023969236933
The Faithfull 35 Piece Router Bit Set with 1/2in shank. Tungsten carbide tips ensure long life and the storage case provides a safe place to store the bits...
In stock
+ −
Trend - 46/39 x 1/4 TCT Bearing Guided Rebate Set 35 x 12.7mm
£82.07 (£98.48 inc VAT)
Trend, 5027654008737, 46/39X1/4TC
1/4in Shank. By changing the bearing the size of the rebate can be altered. Supplied with four bearings. 19 mm Bearing gives rebate of 7.9 mm 16 mm...
In stock
+ −
Trend - 9/72 x 1/4 TCT Bearing Guided Corner Bead Cutter 4.8 Radius
£81.30 (£97.56 inc VAT)
Trend, 5027654013939, 9/72X1/4TC
Tooling T.C.T. 1/4in Shank. R = 4.8 mm D = 28 mm d = 25.7 mm B = 16 mm
In stock
+ −
Trend - 46/82 x 1/2 TCT 90° Bearing Guided Triple Flute Cutter 12.7 x 38.1mm
£77.36 (£92.83 inc VAT)
Trend, 5027654009192, 46/82X1/2TC
This trimmer has twin bearings for stability by increasing the bearing surface. An industrial profiling tool for longer runs of work when a clean finish...
In stock
+ −
Trend - 46/09 x 1/2 TCT 90° Shank Mounted Template Profiler 19.1 x 50mm
£76.44 (£91.73 inc VAT)
Trend, 5027654008164, 46/09X1/2TC
A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming....
In stock
+ −
Trend - 13/30 x 1/2 TCT Radius Cutter 12.7mm Radius
£75.68 (£90.82 inc VAT)
Trend, 5027654002490, 13/30X1/2TC
TC. 1/2in Shank R = 12.7 mm D = 25.4 mm C = 15.9 mm
In stock
+ −
Trend - 46/150 x 1/2 TCT Bearing Guided Ovolo & Round Over 12.7mm Radius
£75.68 (£90.82 inc VAT)
Trend, 5027654008270, 46/150X1/2TC
Tooling : T.C.T. 1/2in Shank. R = 12.7 mm D = 38 mm C = 19 mm Bearings = 9.5 and 12.7 mm
In stock
+ −
Trend - 46/150 x 1/4 TCT Bearing Guided Ovolo & Round Over 12.7mm Radius
£75.68 (£90.82 inc VAT)
Trend, 5027654008287, 46/150X1/4TC
Tooling : T.C.T. 1/4in Shank. R = 12.7 mm D = 38 mm C = 19 mm Bearings = 9.5 and 12.7 mm
In stock
+ −
Trend - 46/44 x 1/4 TCT Bearing Guided Rebater 24mm x 12.7mm
£75.68 (£90.82 inc VAT)
Trend, 5027654008805, 46/44X1/4TC
Trend 46/44 rebate set which include different size bearings for a choice of rebates, they provides easy setting up and accurate depth of cut. Ideal for...
In stock
+ −
Trend - 342 x 1/2 TCT Bearing Guided Biscuit Jointer 4.0 x 40mm
£74.93 (£89.92 inc VAT)
Trend, 5027654006207, 342X1/2TC
T.C.T. 1/2in Shank.
In stock
+ −
Trend - 342 x 1/4 TCT Bearing Guided Biscuit Jointer 4.0 x 40mm
£74.93 (£89.92 inc VAT)
Trend, 5027654006214, 342X1/4TC
T.C.T. 1/4in Shank.
In stock
+ −
Trend - SET/SS9TC 1/2in TCT Router Bit Starter Set, 15 Piece
£74.48 (£89.38 inc VAT)
Trend, 5027654034767, SET/SS9X1/2TC
Trend SET/SS9TC 15 Piece Router Bit Starter Set contains a range of popular 1/2in tungsten carbide tipped cutters for a variety of applications. Suitable...
In stock
+ −
Trend - 46/37 x 1/2 TCT Bearing Guided Chamfer 45° 31.8 x 12mm
£72.50 (£87.00 inc VAT)
Trend, 5027654026267, 46/37X1/2TC
T.C.T. 1/2in Shank. A = 45° C1 = 12 mm C2 = 16 mm D = 31.8 mm B = 9.5 mm
In stock
+ −
Trend - 46/37 x 1/4 TCT Bearing Guided Chamfer 45° 31.8 x 12mm
£72.50 (£87.00 inc VAT)
Trend, 5027654021712, 46/37X1/4TC
T.C.T. 1/4in Shank. A = 45° C1 = 12 mm C2 = 16 mm D = 31.8 mm B = 9.5 mm
In stock
+ −
Trend - 46/94 x 1/2 TCT 90° Shank Mounted Template Profiler 19.1 x 25.4mm
£72.50 (£87.00 inc VAT)
Trend, 5027654026298, 46/94X1/2TC
Tooling Tungsten Carbide 1/2 in Shank. Angle A = 90° D = 19.1 mm C = 25.4 mm
In stock
+ −
Trend - 13/3 x 1/4 TCT Radius Cutter 10.0mm Radius
£70.07 (£84.08 inc VAT)
Trend, 5027654002520, 13/3X1/4TC
Tooling : T.C.T. 1/4in Shank. R = 10 mm D = 20 mm C = 18 mm
In stock
+ −
Trend - 36/10 x 1/4 TCT Strip Recessor 13 x 19 x 10 x 6mm
£70.07 (£84.08 inc VAT)
Trend, 5027654006375, 36/10X1/4TC
Tooling : T.C.T. 1/4in Shank. D1 = 13 mm D2 = 19 mm C1 = 10 mm C2 = 6 mm
In stock
+ −
Trend - Door Stand 32mm - 55mm D/STAND/A
£68.82 (£82.58 inc VAT)
Trend, 5027654542590, D/STAND/A
The Trend Door Stand holds the door on its edge while routing hinge recesses and mortices for locks. Holds door securely. Non-scratch base. Adjustable clamp...
In stock
+ −
Trend - 4/24 x 1/2 TCT Two Flute Cutter 15.9 x 63mm
£68.55 (£82.26 inc VAT)
Trend, 5027654006726, 4/24X1/2TC
This Trend 4/24 x 1/2 TCT Two Flute Cutter has the following specification: D: 15.9mm (5/8in) C: 63mm OL: 105mm Shank Diameter: 1/2in
In stock
+ −
Trend - 4/80 x 1/2 TCT Two Flute Cutter 25.4 x 37mm
£68.55 (£82.26 inc VAT)
Trend, 5027654007112, 4/80X1/2TC
This Trend 4/80 x 1/2 TCT Two Flute Cutter has the following specification: D: 25.4mm (1in) C: 37mm OL: 66mm Shank Diameter: 1/2in
In stock
+ −
Trend - 4/30 x 1/2 TCT Two Flute Cutter 18.0 x 50mm
£66.88 (£80.26 inc VAT)
Trend, 5027654006818, 4/30X1/2TC
This Trend 4/30 x 1/2 TCT Two Flute Cutter has the following specification: D: 18mm (45/64in) C: 50mm OL: 92mm Shank Diameter: 1/2in
In stock
+ −
Trend - 62/10 x 1/4 TCT Drill / Countersink / Counterbore
£66.88 (£80.26 inc VAT)
Trend, 5027654011744, 62/10X1/4TC
These combination tools in TCT can be used in abrasive materials. They will drill, countersink and finally counterbore a parallel hole. Designed to receive...
In stock
+ −
Trend - 9/71 x 1/4 TCT Bearing Guided Corner Bead Cutter 3.2 Radius
£66.08 (£79.30 inc VAT)
Trend, 5027654013915, 9/71X1/4TC
Tooling T.C.T. 1/4in Shank. R = 3.2 mm D = 22 mm d = 18.9 mm B = 12.7 mm
In stock
+ −
Trend - 3-in-1 Pocket Hole Jig
£65.31 (£78.37 inc VAT)
Trend, 5027654065228, PH/JIG/BK
Trend PH/JIG/BK 3-in-1 Pocket Hole Jig for fast and accurate joining of timber and plywood, giving strong instant joints. Multi-function design for twin...
In stock
+ −
Trend - 36/19 x 1/2 TCT Strip Recessor 9.5 x 19 x 13 x 6mm
£63.69 (£76.43 inc VAT)
Trend, 5027654006382, 36/19X1/2TC
Tooling : T.C.T. 1/2in Shank. D1 = 9.5 mm D2 = 19 mm C1 = 13 mm C2 = 6 mm
In stock
+ −
Trend - 46/140 x 1/2 TCT Bearing Guided Ovolo & Round Over 9.5mm Radius
£63.69 (£76.43 inc VAT)
Trend, 5027654008256, 46/140X1/2TC
Tooling : T.C.T. 1/2in Shank. R = 9.5 mm D = 32 mm C = 16 mm Bearings = 9.5 and 12.7 mm
In stock
+ −
Trend - 46/140 x 1/4 TCT Bearing Guided Ovolo & Round Over 9.5mm Radius
£63.69 (£76.43 inc VAT)
Trend, 5027654008263, 46/140X1/4TC
Tooling : T.C.T. 1/4in Shank. R = 9.5 mm D = 32 mm C = 16 mm Bearings = 9.5 and 12.7 mm
In stock
+ −
Trend - 46/130 x 1/2 TCT Bearing Guided Ovolo & Round Over 6.3mm Radius
£61.44 (£73.73 inc VAT)
Trend, 5027654008225, 46/130X1/2TC
Tooling : T.C.T. 1/2in Shank. R = 6.3 mm D = 25.4 mm C = 13 mm Bearings = 9.5 and 12.7 mm
In stock
+ −
Trend - 46/130 x 1/4 TCT Bearing Guided Ovolo & Round Over 6.3mm Radius
£61.44 (£73.73 inc VAT)
Trend, 5027654008232, 46/130X1/4TC
Tooling : T.C.T. 1/4in Shank. R = 6.3 mm D = 25.4 mm C = 13 mm Bearings = 9.5 and 12.7 mm
In stock
+ −
Trend - TR30 x 1/2 TCT Shank Mounted Bearing Guided Profiler 19.1 x 50mm
£61.44 (£73.73 inc VAT)
Trend, 5027654031971, TR30X1/2TC
Trend TR30 Trade Shank mounted guided profiler with extra long shank ideal for trimming and profiling timber, man-made board. Features 2mm micrograin...
In stock
+ −
Save 7%
Faithfull - 1/4in TCT Router Bit Set, 30 Piece
£65.42 £60.71 (£72.85 inc VAT)
Faithfull, 5023969233550
The Faithfull 30 Piece Router Bit Set with 1/4in shank. Tungsten carbide tips ensure long life and the storage case provides a safe place to store the bits...
In stock
+ −
Trend - TR35 x 1/4 TCT Biscuit Jointer Set 4.0 x 37.2mm
£60.51 (£72.61 inc VAT)
Trend, 5027654032046, TR35X1/4TC
Enables biscuit jointing with timber, man-made fibre and particle board. The correct choice of bearing will ensure the correct depth of cut for biscuit...
In stock
+ −
Trend - 24/10 x 1/4 TCT Plug Maker No.10
£59.74 (£71.69 inc VAT)
Trend, 5027654004326, 24/10X1/4TC
TC 1/4in Shank. Plug Depth Max. 16mm Plug Depth Min. 12mm Plug Body Diameter. 12mm
In stock
+ −
Trend - 24/12 x 1/4 TCT Plug Maker No.12
£59.74 (£71.69 inc VAT)
Trend, 5027654004340, 24/12X1/4TC
H.S.S. 1/4in Shank. C = 16 mm D = 12 mm Plug Body Diameter. 22 mm
In stock
+ −
Trend - 24/80 x 1/4 TCT Plug Maker No.8
£59.74 (£71.69 inc VAT)
Trend, 5027654004395, 24/80X1/4TC
TCT for use with drilling machines or routers. H.S.S. 1/4in Shank. C = 9.5 mm D = 16 mm Plug Body Diameter. 16 mm
In stock
+ −
Trend - 46/12 x 1/4 TCT Bearing Guided Ovolo & Round Over 4.8mm Radius
£59.74 (£71.69 inc VAT)
Trend, 5027654008218, 46/12X1/4TC
Tooling : T.C.T. 1/4in Shank. R = 4.8 mm D = 22 mm C = 12.7 mm Bearings = 9.5 and 12.7 mm
In stock
+ −
 Prev
1 2 3 4 5
Next